Purchase Plans
     |
One manual includes plans for the 5 tables shown above. The machines include: 13 x 13 Fixed Gantry, 17 x 20 Overhead Leadscrew, 17 x 20 Dual Leadscrew, 25 x 37 Dual Leadscrew, and 27 x 64 Belt Drive. These plans are $39.95 USD plus shipping by flat rate USPS Priority Mail. Go to the Order Page for the 5 Machine Plans shown above.  |
 The other set of plans is for a machine that uses
racks and pinions, or
leadscrews on the X and Y axes. The gantry and carriage are made of stock sizes of aluminum or wood. The machine has a cutting area of 24 x 48 inches. This plan set does not include the plans for the other 5 machines. The plans are $49.95 USD plus shipping by flat rate USPS Priority Mail. Go to the Order Page for the Rack/Leadscrew Plans. These plans
do not include
directions
for the software and electronics.
This information is covered by
the
recommended software and stepper suppliers.
These plans do address the Step per Unit values needed to configure the software. |
The email address is: Email is answered daily. If you do not receive a response within 24 hours it is because an email was lost in route; please resend the email. |
.........................
NOTICE: That which makes CNC machines useful also makes them
dangerous; they move without direct human control.A CNC table MUST have an easily accessible Emergency Stop button. The table must be in a safe location where it is inaccessible to children and unauthorized users; these are not toys, even a small machine can inflict serious injury. You, the user of these plans, assume all liability and responsibility for the construction process, and the product you create. Copyright © 2008 David K.
Steele
David Steele is the copyright owner of these plans. In consideration for payment, David Steele grants a license to use the plans for the purpose of building a machine for personal use. The license is not assignable. |